4×1.0mm2 Solid FIRE Resistant Cable

180.00

Conductor:

1.0mm2 solid Bare Copper

Nom.Dia:0.0445±0.0003″(1/1.13±0.008mm)

Insulation:

Type.silicone rubber

Dia over Insulation:0.0937±0.0040″ nom.(2.4±0.1mm)

Drain Wire:1/1.13±0.008mm solid Tinned-Copper

Shield:0.0047″(0.120mm)thick Fireproof aluminum foil

ELECTRICAL PROPERTIES:

  1. Temperature Rating:-40℃~+90℃
  2. Operating Voltage:300 /500V
  3. Withstand voltage test :
  4. Between insulated conductors,AC: 2000V / 5min, no breakdown
  5. Between insulated conductor and ground wire,AC: 1000V / 5min, no breakdown
  6. Maximum resistance:18.1 0hms/KM at 20℃

 STANDARD:

  1. All these cables comply to:
  2. Application of insulation :EN50363-1、EN50363-2-1、BS2683
  3. Inner Conductor Diameter:BS EN 60228
  4. Insulation:EN50363-1、EN50363-2-1、BS2683
  5. Sheath :EN7655-6.1、BS EN50267-2-1BS60754、BS2683
  6. Smoke emission:EN 61034-2: 2005+A2:2020
  7. Corrosive and acid gas:EN 60754-1: 2014
  8. Flame propagation on a single cable:EN 60332-1-2:2004
  9. Fire resistance(single cable) :BS6387、BS EN50200、BS 8434-2
  10. Fire resistance time:PH30-PH120
  11. Guide for safe use of cables:BS5839-1

 CROSS SECTION:

lpcb-so-4core-structure-diagram

 APPLICATIONS:

Fire-fighting cables are mainly used for emergency lighting, fire observation, signal sensing system, blower system, communication call system, control equipment system, fire pump and fire alarm system circuit cables, etc.

For example: ★ Office ★ School ★ Airport ★ Underground and tunnel ★ Railway station ★ Computer center ★ Alarm system ★ Traffic control system ★ Fire protection system

Shopping Cart
Scroll to Top